23 Apr

Posted at 15:18h in pump-information-en
0 Likes

CENTRIFUGAL PUMP SJM2&3 Features: Compact and light weight design with 2 poles motor: Performance covering wide range as much as a heavy duty pump: Minimum space required and easy installation: Back pull out structure, which ensures eay of assembly, reassembly and maintenance with our removal from the pipeApplication: General Water Supply in dwelling houses,city buildings,etc : Circulation of cold and/or hot water: Water supply unit ,Booster pump: Irrigation: SprinklerSpecificationLiquid : Fresh Water (0-80°C)Max Suction Pressure : -6kgf/cm2Revolution speed : 3000 rpm / 3600 rpmStructureImpeller : ClosedSealing : Mechanical SealBearing : Sealed Ball Bearing(Motor)MaterialImpeller : Bronze (CAC406)Shaft : Stainless steel (SUS304Casing : Cast iron (FC200) CATALOGUE AND SPECIFICATION Catalogue and Specification Model : SJM2&3 50 Hz Catalogue and Specification Model : SJM2&3 60 Hz ...

23 Apr

Posted at 15:18h in pump-information-en
0 Likes

CENTRIFUGAL PUMP SJ4 FeaturesBack-Pull-Out design: This back-pull-out construction ensures easy disassembling without removing suction and discharge pipes. So the maintenance is very easy Conformable to JISCompact-Stability-Non overloadfor any discharge capacityConformable to JIS: JIS standard(JISB8313) is established in Japan by referring internal standard ISO2858Application: General Water Supply in dwelling houses,city buildings,etc : Circulation of cold and/or hot water: Industrial use: Irrigation and sprinkler: Water systemSpecificationLiquid : Fresh Water (0-80°C)Max Suction Pressure : -6kgf/cm2 or (10.2kgfcm2-(shutoff head/10))Revolution speed : 1500 rpm / 1800 rpmStructureImpeller : ClosedSealing : Mechanical Seal , Gland PackingBearing : Sealed Ball BearingMaterialImpeller : Cast iron (FC200) and Stainless casting (SCS13)Shaft : Stainless steel (SUS403)Casing : Cast iron (FC200)Common Base : Cast iron (FC200) CATALOGUE AND SPECIFICATION Catalogue and Specification Model : SJ4 50 Hz Catalogue and Specification Model : SJ4 60 Hz ...

23 Apr

Posted at 15:17h in pump-information-en
0 Likes

CENTRIFUGAL PUMP LP FeaturesInline: As the pump of in-line type can be installed as a part of the pipe, no floor space for installation is requiredFree Direction: The pump of this model can be installed vertically or horizontallyEasy Maintenance: The pump can be disassembled without disconnecting the pipe.it is easy to inspect and repair the pumpApplication: Hot water supply: In-line booster: Circulation of cooling: General Water Supply in dwelling houses,city buildings,etc: Circulation of cold and/or hot waterSpecificationLiquid : Fresh Water (0-80°C) but for Type 0-100°CMax Suction Pressure : -6kgf/cm2Revolution speed : 3000 rpm / 3600 rpmStructureImpeller : ClosedSealing : Mechanical SealBearing : Sealed Ball Bearing(Motor)MaterialImpeller : Bronze (CAC406)Shaft : Stainless steel (SUS304)Casing : Cast iron (FC200) CATALOGUE AND SPECIFICATION Catalogue and Specification Model : LP 50 Hz Catalogue and Specification Model : LP 60 Hz ...

23 Apr

Posted at 15:17h in pump-information-en
0 Likes

CENTRIFUGAL PUMP SJ FeaturesBack-Pull-Out design: This back-pull-out construction ensures easy disassembling without removing suction and discharge pipes. So the maintenance is very easyCompact-Stability-Non overloadfor any discharge capacityConformable to JIS: JIS standard(JISB8313) is established in Japan by referring internal standard ISO2858Application: General Water Supply in dwelling houses,city buildings,etc : Circulation of cold and/or hot water: Industrial use: Irrigation and sprinkler: Fire fighting facilitiesSpecificationLiquid : Fresh Water (0-80°C)Max Suction Pressure : -6kgf/cm2 or (10.2kgfcm2-(shutoff head/10))Revolution speed : 3000 rpm / 3600 rpmStructureImpeller : ClosedSealing : Mechanical Seal , Gland PackingBearing : Sealed Ball BearingMaterialImpeller : Bronze (CAC406)Shaft : Stainless steel (SUS403)Casing : Cast iron (FC200)Common Base : Cast iron (FC200) CATALOGUE AND SPECIFICATION Catalogue and Specification Model : SJ 50 Hz Catalogue and Specification Model : SJ 60 Hz ...

23 Apr

Posted at 15:09h in water-supply-information-en
0 Likes

water supply unit Fire Fighting Pump Features: Unitized fire fighting pump: Several design suitable for customer: High level technology and reliability have won considerable priase: High quality and reliabilityApplication: Fire hose pump: Fire sprinkler systemSpecificationLiquid : Clean WaterLiquid temperature : 0 - 40 °CInstallation environment : Indoor 0 - 40 °C Humidity below 85%: No dew condensation allowedPump materialAccording to Model of pumpControl systemJapan Standard and other system CATALOGUE AND SPECIFICATION Catalogue and Specification Fire Fighting Pump ...

23 Apr

Posted at 15:09h in water-supply-information-en
0 Likes

water supply unit ASVM-VFC Features: Estimate terminal pressure constant control water supply unit(inverter control)The electricity consumption is suspressed to approximately 50% that of a conventional system: Rust free material designPump use "rust free" precision stainless steel investment casting.and other wet part design base on "rust free such stainless,resin.: Quiet and compactPrecision finish contributes to noise reductionInverter control reduce noise and also prevent water hammer: High quality and reliabilityApplication: Water supply unit: Pressure booster in the building, hotels, residential complexes: Pressure booster station, supply of water networks: Pressure booster for industrial water supplySpecificationLiquid : Clean WaterLiquid temperature : 0 - 40 °CInstallation environment : Indoor 0 - 40 °C Humidity below 85%: No dew condensation allowedPump materialPump ASVM type stainless vertical multistage centrifugal pumpCasing : Stainless casting (SCS13) Main Shaft : Stainless (SUS431) Impeller : Stainless (SUS304)Control systemEstimated end pressure constant controlDischarge pressure constant control by frequency control CATALOGUE AND SPECIFICATION Catalogue and Specification ASVM-VFC Type ...

23 Apr

Posted at 15:09h in water-supply-information-en
0 Likes

water supply unit NX-NFC Features: Estimate terminal pressure constant control water supply unit(inverter control)The electricity consumption is suspressed to approximately 50% that of a conventional system: Rust free material designPump use "rust free" precision stainless steel investment casting.and other wet part design base on "rust free such stainless,resin.: Quiet and compactPrecision finish contributes to noise reductionInverter control reduce noise and also prevent water hammer: High quality and reliabilityApplication: Water supply unit : Pressure booster in the building, hotels, residential complexes: Pressure booster station, supply of water networks: Pressure booster for industrial water supplySpecificationLiquid : Clean WaterLiquid temperature : 0 - 40 °CInstallation environment : Indoor 0 - 40 °C Humidity below 85%: No dew condensation allowedPump materialPump NX type stainless horizontal multistage centrifugal pumpCasing : Stainless casting (SCS13) Main Shaft : Stainless (SUS304) Impeller : Stainless (SUS304)Control systemEstimated end pressure constant controlDischarge pressure constant control by frequency control CATALOGUE AND SPECIFICATION Catalogue and Specification NX-NFC Type ...

23 Apr

Posted at 14:53h in fan-information-en
0 Likes

Teral fan CMF2,3 Application: Supply Fan and Exhaust Fan: Boiler feed fan of factory: Industrial use: The air - mixing system for high and medium building, factory hospital,etc: The cooling and air supply for machinesSpecificationLiquid : Air, Gas Temperature : 0 - 350°CMaterialImpeller : Steel (SS400,SPHC,SM570) Shaft : Carbon Steel (S45C)Casing : Steel (SS400)Common Base : Steel (SS400)Transmission systemBelt drive : Type RS OB RDMotor direct drive : Type MOB CATALOGUE AND SPECIFICATION Catalogue and Specification Model : CMF 50 Hz Catalogue and Specification Model : CMF 60 Hz ...